MTK Auth Bypass Tool V72 (MTK Meta Mode Utility) is a free windows program that helps to bypass DAA & SLA Auth (Secure Boot protection) from any MediaTek MTK-powered phone quite easily.
FEATURES;
MTK Brom Mode:
- Disable Auth
- Dump Preloader
- Crash Preloader
- Crash Preloader To Brom
- Samsung MTK Force Brom (DM)
- Samsung MTK Exit Brom
- Samsung MTK Rebuild PMT (DM)
- FRL-L22 Y9A Force Brom
- Reboot Meta
- Reboot AT Mode
- Reboot Factory Mode
- Reboot Fastboot Mode
- VIVO New SEC Read info (FM)
- Analyze MTKA DA
META Mode:
- Read Meta Info
- Read Part (META)
- Format Part (Meta)
- Write Part (Meta)
- Dump MDDB/APDB (META)
- DUMP NV Regions (META)
- Dump User area (Meta)
- Dump PGPT (Meta)
- Dump EXT_CSD (META)
- EMMC Health Check (META)
- Factory Reset - META
- Factory Reset - META 2
- Gen FRP Reset PKG (META)
- Read NVRAM
- Wipe NVRAM
- Write NVRAM
Android Mode:
- Read ADB Info
- Read Fastboot Info
- Exit Fastboot Mode
- Xiaomi Enable Diag (ADB)
- Install APK (ADB)
- Disable the Payjoy APP (ADB)
- Generic ADB FRP Bypass
- Generic Fastboot Factory Reset
- Generic Fastboot FRP Wipe
- Wipe NVRAM_NVDATA (Fastboot)
- Extract Super IMG
- Extract OFP (MTK + QCOM)
- Extract Samsung ROM (MTK)
- Extract Huawei UPDATE (MTK)
- Extract OnePlus ROM (.ops)
- Extract LG ROM (.kdz)
- Extract RedMagic (payload.bin)
Extra Features:
- Samsung Reboot to Download Mode
- Samsung Read Info Download Mode
- Samsung Factory Reset (MTP)
- Samsung Activate ADB (MTP)
- Huawei Fastboot To Upgrade
- Huawei Normal To Upgrade
- VIVO Demo Remove (AT)
- VIVO Demo Remove (MT6877T)
- PGPT to Scatter
- Scatter to PGPT
SAMSUNG Features:
- Samsung MTK Force BRom (DM)
- Samsung MTK Exit BRom (FM)
- SM-A326U (A32 5G) BIT7 Fix Dead Brick
- SM-A037F KG Locked Force Brom (DM)
- Samsung Read Info (DM)
- Samsung Reboot to (DM)
- Samsung Activate ADB (MTP)
- Samsung Factory Reset (MTP)
- Samsung switched (SEC CTRL FLAG) to (-1)
Supported CPUs:
- MT6572
- MT6580
- MT6582
- MT6592
- MT6595
- MT6735
- MT6737
- MT6739
- MT6753
- MT6755
- MT6750
- MT6750M
- MT6750T
- MT6750S
- MT6757
- MT6761
- MT6762
- MT3369
- MT8766B
- MT6763
- MT6765
- MT6768
- MT6771
- MT6779
- MT6785
- MT6795
- MT6797
- MT8127
- MT8163
- MT8516
- MT8173
- MT8695
- MT6873
- MT6799
- MT8590
- MT6781
- MT6768
- MT6883
- MT6885
- MT6889
- MT6833
- MT6853
- MT6853V
- MT6873
- MT6891Z
- MT6893
- MT8765WB
- MT8385
- MT8183
- MT8666
Changelog!!!
MTK META Utility V72:
& Release date - 23.12.2022.
* New Features and Enhancements :
- Added Samsung Galaxy A03 SM-A035F (BIT2) dead boot repair via (USB),
no need (JTAG/ISP/DEBUG PAC), just one click.
- I have seen a lot of people struggling to recover their bricked Samsung UniSoC devices (Especially Samsung A035F),
after flash (wrong/low-ver/downgrade/incompatible) ROM or (Debug/Eng) ROM (combination) in BRom mode (SPRD U2S Diag),
the device becomes completely dead, or stuck at FastBoot mode.
- My current repair method can recover the device under the both conditions.
- Just connect the device in (SPRD/BRom) mode and perform the operation.
- The repair operation is safe and don't affect on (NV/MODEM/calibration) data.
- Recommended version to flash after repair (A035FXXU2BVI8).
- Flash (U2/X2) (Debug/FAC) ROM or update your device to BIT2 Rev, if you want to try the repair procedure.
- DEBUG_USB_RECOVERY PAC files available everywhere, you can download from (Infinity/Pandora) support.
and flash with any SPD tool. After FW update, the device will stuck at Fastboot mode,
in case if you flash with any tool, make sure to un-tick (SPLLoaderUFS) partition,
you will need to re-connect in BRom mode, and recover with our software.
- After repair boot with our software, just flash the device with ODIN using Samsung factory firmware, recommended version to flash after repair (A035FXXU2BVI8) or higher.
- After flash Debug Binaries (Eng/Dev ROM) in BootROM mode,
you can Unlock & Relock the Bootloader easily via Fatsboot cmd,
using the following commands in Fatsboot mode :
- fastboot.exe oem unlock.
- fastboot.exe flashing lock.
* Bug Fixes :
- Random crashes while (searching/connection) to COM ports.
- Some (GUI/Internal) optimizations were added.
* Phased out (G-Lock disable tasks) :
- For a legal issues, we don't do these operations anymore.
- my main aim of creating this software is to help people (recover/fix) their (&OWN&) devices legally only.
* 1st mission accomplished, i'll work this week on the second task (Honor X6).
$ We allow the use of this software under certain circumstances.
- Therefore, this software is provided 'as-is', without any express or implied warranty.
In no event will the authors be held liable for any damages arising from the use of this software,
please only use for legal servicing and maintenance of mobile phones,
and must not be used for illegal purposes.
- USE it at your own risk.
DOWNLOAD LINK:::HERE
0 Comments
If You need more help contact me on WhatsApp +254707784372